/ /

How to Repair a Sex Doll: Simple Fixes You Can Do Yourself

Jun 21,2024 | SDS

Sex dolls are nowadays preferred more as realistic figures for comfort and satisfaction. However, like any other product, they may require minor repairs once in a while. Being able to repair these problems on your own is beneficial. This guide will walk you through some common problems and the simple solutions to keep your sex doll in top shape. If you’re ever in doubt or need more advanced assistance, remember that Sex Dolls Station offers expert advice and support.

Understanding Common Issues

It is very important to know common problems faced by sex doll owners before starting the repairs. Some of these issues include small damages in the silicone or TPE (thermoplastic elastomer), loose joints, and internal skeleton issues. The good news is that many of these problems can be resolved at home with a few basic tools and materials.

Fixing Tears and Cuts

Small tears or cuts appearing in the silicone or TPE material are among the most common issues faced with sex dolls. Here is how you can fix them:

  • Clean the Area: Ensure that the area is clean before you attempt to repair a tear. Use mild soap and water to cleanse this area gently. Then pat it dry using a soft cloth before allowing it to air completely dry out.
  • Apply Adhesive: There is a specific adhesive for this situation as it only pertains to silicone or TPE unless the tear is very small. From the two sides of the tear you should apply a small quantity of adhesive. Do not apply too much, otherwise, the broken part will look like it has been repaired and may look worse.
  • Press & Hold: Light pressure mainly has to be applied on the sides of the tear. Leave them in position for a few minutes to ensure that the sticky part sets well so that it can bond nicely. In the case of larger tears, however, there is usually the probability that the sides might separate before the adhesive dries, so there is the need to apply a clamp or any similar tool to ensure the sides remain bonded together.
  • Allow to Cure: Allow the adhesive to dry or set properly as stated by the manufacturer. This usually takes several hours. Do not use the doll during this time to ensure the repair sets correctly.

Repairing Loose Joints

The joints of a use of sex doll can sometimes develop some sort of wear whereby you can find it complicated when trying to maintain a certain position. This is how you can fix it:

  • Identify the Problem Joint: First you need to determine which joint in particular is too loose: This could be in the arms, legs or the neck.
  • Access the Joint: Carefully access the internal joint by making a small incision near the loose area. Carefully slash using a sharp blade, not very deep, but just enough to open up the joint.
  • Tighten the Joint: Once you have access to the joint, you can tighten it using the appropriate tool. Most joints can be tightened with a standard screwdriver or an Allen wrench, depending on the doll's design.
  • Close the Incision: After tightening the joint, use adhesive to seal the incision you made. Follow the same steps as fixing tears to ensure the area is securely closed.

Managing the Internal Skeleton

Sex dolls have an internal skeleton that provides structure and allows for posing. Sometimes, parts of this skeleton can become dislodged or bent. Here's how to handle this issue:

  • Locate the Problem: Feel around the area to identify where the skeleton issue is. This could be a dislocated arm or a bent leg.
  • Correct the Position: Gently manipulate the limb back into the correct position. Be careful not to apply too much force, as this could cause additional damage.
  • Support the Area: If the skeleton is prone to dislodging, consider adding extra support. This could be done with a combination of adhesive and additional padding inside the doll.

Preventive Care

Prevention is always better than repair. Here are some tips to keep your sex doll in excellent condition:

  • Regular Cleaning: Clean your doll regularly to prevent dirt and bacteria buildup. Use mild soap and water, and avoid harsh chemicals that can damage the material.
  • Proper Storage: Store your inflatable girlfriend in a cool and dry place. Avoid direct sunlight and extreme temperatures. Use a storage bag or box to protect it from dust and damage. 
  • Gentle Handling: Treat your doll with care. Avoid rough handling that can cause tears or loosen joints.
  • Routine Inspections: Regularly inspect your doll for any signs of wear and tear. Dealing with small issues initially will prevent future menace.

When to Seek Professional Help

While many repairs can be done at home, some issues may require professional assistance. If you encounter a problem that seems beyond your ability to fix, don't hesitate to contact Sex Dolls Station. Our team of experts is always ready to help you with more complex repairs or provide advice on maintaining your doll.


Maintaining your sex doll doesn’t have to be a daunting task. With the right tools and a bit of knowledge, you can handle most minor repairs yourself. Remember to clean and store your doll properly to prevent issues from arising. For more complex problems, the professionals at Sex Dolls Station are always here to assist. By following these tips, you can ensure your sex doll remains in excellent condition, providing you with comfort and satisfaction for years to come.